유니온백시멘트이미지

Finishing material for eternal eleganceINTERIOR TILE GROUT

INTERIOR TILE GROUT is designed to perform high workability, crack resistance as well as beautiful finishing.

  • 내구성 Durability
  • 내수성 Water resistance
  • 균열안전성 Crack binding strength
  • 친환경 건축자재 Eco-friendly construction material
INQUIRY FOR THE DETAILS UNION Cement Process
닫기
Cement manufacturing process
Mining and Crushing 1~3

Mining limestone and conveying it into the hammer crusher.
Crushing and storing it in the limestone stockpile maintaining homogeneous quality.

Mixing and Milling4~6

Mixing and milling the crushed limestone with other raw materials.

Sintering 7~9

Sintering in the rotary kiln at 1450C after pre-heating.
Conveying the intermediate product, clinker through the cooler into the cement mill.

Producing and Delivering10~11

Milling it with gypsum (3-5%) and producing the cement. Storing it in Silo and delivering it in bulk or packed in ton-bag.

INQUIRY
닫기
Best partner for embellishing building
Only for PRODUCT 최고의 제품을 향한 신념
Only for PRODUCT Belief to the best product
Only for PRODUCT 최고의 제품을 향한 신념
Only for PERFORMANCE Best performance for works
convenient
Only for TECHNOLOGY 기술 연구를 통한 품질의 과학화
Only for TECHNOLOGY Precise quality control via R&D
Only for PRODUCT Belief to the best product

Under the strict quality management, Union’s INTERIOR TILE GROUT has the optimal mixture of raw materials and presents bright white together with good workability. Additionally it accomplishes wonderful finishing and no-cracking on curing since high performance additives are added and it prevents long-term contraction by dehydration.

  • High performance-additives and strictly screened aggregates added
  • Outstanding water retention and workability
  • Anti-contraction and anti-cracking
Only for PERFORMANCE Best performance for works convenient
Specification
Product INTERIOR TILE GROUT I, II (Ordinary, advanced)
Density Approx. 1.97g/cm3
Color White powder
Working hours Use the mixed mortar within 40 min. (Working hours can be shortened in intensively hot seasons)
Main composition White Portland Cement, Fine aggregates, Additives
Standard amount Approx. 1~1.5kg per joint (3mm/width)m2
Package 2kg x 10EA in box, 20kg in sack
Curing time Gait on Day 7th / Curing on Day 28th
Mixture Approx. 5ℓ/20kg
Working temperature 10~25℃
Best valid for 3 months
Application
  • Kitchen, bathroom, toilet installation, other interior wall
  • Grouting interior tile on wall & floor
Instruction
  • Groundwork treatment
  • Sprinkle water onto the dry surface of the base
  • Mix 5ℓ of water per 20kg sack
  • Use the mixed mortar within 40 min. and complete the finishing (Working hours can be shortened in intensively hot seasons)
  • Work by a dedicated trowel by pressing it sufficiently
  • Work it after tile or brick construction is fully cured (approx. in 7 days)
내장용백시멘트1 내장용백시멘트2 내장용백시멘트3 내장용백시멘트4
Attention
  • Avoid construction below 5℃
  • Work it with only water (in case of using other materials other than water, quality degradation and workability can be expected)
  • When finalizing the tile surface, wipe out with wet sponge at 1st and dry cloth at 2nd. In case of using excessively wet sponge or cloth, water can be penetrated into work area and it can bring discoloring or efflorescence
  • Store it in well-ventilated and dry in-house condition
  • Do not use if for other secondary products or in-site terrazzo
  • If pure white desired, use INTERIOR TILE GROUT (II-advanced)
  • In case of using it with excessive water or after recommended working hours, strength could be degraded
  • If other purposes desired, please contact our R&D department